Photo: Trafic Innovation
P-270 LED Road Sign for Pedestrian and School Crosswalks
LED signage that draws attention to crosswalks.
This sign increases vigilance where the urban environment weakens traditional signage.
LEDs built into the pictogram activate by push button, on a schedule or continuously. A photocell adjusts their intensity at night.
Applications and technology
LED TRAFFIC SIGN
Used in locations where visibility is limited, the P-270 LED road sign for pedestrian and school crosswalks maximizes drivers’ attention on crosswalks in critical locations. The preprogrammed flashing LEDs integrated into the pictogram can be activated in three ways: with a push button, with an internal calendar or continuously 24/7. Thanks to the integrated photocell, the intensity of the LEDs automatically adjusts to the ambient light at night.
DESCRETE, LIGHT AND THIN DESIGN
EASY INSTALLATION ON STANDARD POSTS
HIGH INTENSITY LEDs

SCHEDULE
Every controller is equipped with an internal schedule that can start or stop the system according to desired date and time. While in standby, pressing the push-button can still activate the system, which is great for school zones situations.EASY PAIRING OF WIRELESS DEVICES
Whether pairing a remote control or two flashers together, the procedure is quick and easy. The wireless module can be added to the controller, allowing devices to create links between each other. Pairing can be done either in factory or on site, with a computer.
TECHNICAL SPECIFICATIONS OF THE LED ROAD SIGN FOR PEDESTRIAN AND SCHOOL CROSSWALK P-270

ELECTRICAL COMPONENTS
LED Type: 5 mm (T-1 3/4)
Angularity: 25°
Color: Cool White (8000K)
Visibility: Over 300 m (1000′)
Consumption Pedestrian: 8.7 Wh (day) – 3.1 Wh (night)
Consumption School Zone: 13.5 Wh (day) – 4.6 Wh (night)
Controller: Built-in
Auto-Dimmer: Built-in (Control Box)
Voltage In: 10.8 to 15 VDC
Voltage Out: 10.8 to 15 VDC
Dry Contact: 9 to 36 VDC
Connector: Snap-in, Overmolded IP67, 10 mm OD
Flashing Type: 0.1 – 0.2 – 0.5 sec. or Tri-flash, 60x per min.
Operation: Push button or Wireless activation
Wireless Communication: 9 to 36 VDC
Wireless Range: Up to 100 m (330′) free field
Pairing: Built-in (Control Box), PC
Flashing Duration: 30 or 45 sec. under Controller settings (from 1 to 5000 sec. under PC settings)
Operational Temperature: -40 to +50°C (-40 to +131°F)
Pre-setup: 0.2 sec. for 30 seconds
SOLAR Power unit
Solar Panel: 30 W
Battery: 12.8 V – 27 Ah – Lithium LifePo4
Solar Charger: 10 A – MPPT – IP67
Operating Temperature: -40 to +74ºC (-40 to + 165ºF)
Environmental Protection: IP54
Size: 349 x 670 mm (13-3/4″ x 26-3/8″)
Weight: 7.7 kg (17 lb)
| Product number | Description | Box : Dimension – Weight | HSS Code |
|---|---|---|---|
| Assembly Kit | |||
| #38310 | Single-side kit – Set of two (2) for Ontario LED road sign for pedestrian crosswalk left arrow, 30W solar power unit | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38311 | Single-side kit – Set of two (2) for USA, MUTCD – Canada, Alberta BC LED road sign for pedestrian crosswalk left arrow, 30W solar power unit | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38313 | Single-side kit – Set of two (2) for Ontario LED road sign for pedestrian crosswalk left arrow, AC/DC power converter | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38314 | Single-side kit – Set of two (2) for USA, MUTCD – Canada, Alberta BC LED road sign for pedestrian crosswalk left arrow, AC/DC power converter | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38300 | Single-side kit – Set of two (2) for Ontario LED road sign for school crosswalk left arrow, 30W solar power unit | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38301 | Single-side kit – Set of two (2) for USA, MUTCD – Canada, Alberta BC LED road sign for school crosswalk left arrow, 30W solar power unit | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38303 | Single-side kit – Set of two (2) for Ontario LED road sign for school crosswalk left arrow, AC/DC power converter | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| #38304 | Single-side kit – Set of two (2) for USA, MUTCD – Canada, Alberta BC LED road sign for school crosswalk left arrow, AC/DC power converter | (2x) 37 x 28 x 11 in – 30 lbs 18 x 28 x 14 in – 28 lbs | 8530.90 |
| Activation Options | |||
| #38129 | Software Kit for Schedule, configuration and pairing (USB Dongle + Software) | Included in kit box | N/A |
| #36463 | Wireless and battery free Remote Control (software kit required) | Included in kit box | N/A |
| #37173 | Wireless and battery free Push Button Ontario on a Flexible Post (software kit required) | Included in kit box | N/A |
| #336267 | Wireless and battery free Push Button USA, MUTCD – Canada, Alberta BCon a Flexible Post (software kit required) | 8 x 8 x 40 po – 8 lb | 8530.80 |
| #36900 | Radar Vehicule Detector Activation (software kit required) | Box (+ 2 lb) | N/A |
Included with beacon : Installation hardware for 2’’ Telespar post, 2-3/8‘’ round pole, U-Post or streetlight pole. 30 in (760 mm) Male/female extension. Smart USB Dongle required to change configuration of the beacons. 2 years Limited Warranty againts defects in workmanship and materials.
In the same category
RRFB Rectangular Rapid Flash Beacon – Model L
Alerts drivers to slow down as they approach a crossing.

RRFB Rectangular Rapid Flash Beacon – Model S
Improves road signage and increases safety in pedestrian areas.
LED Stop Sign
Illuminated octagon for crosswalks that encourages drivers to stop.